irnsrgn Posted March 2, 2008 Share Posted March 2, 2008 standing on a shovel handle and jumping up and down, must have had good handles back then. and very strong shovel pans. Quote Link to comment Share on other sites More sharing options...
markb Posted March 2, 2008 Author Share Posted March 2, 2008 Thanks everyone, I don't think I have anymore blacksmith related hand tools to post, so get your cameras out and post away. We all love pictures. Mark Quote Link to comment Share on other sites More sharing options...
Frosty Posted March 2, 2008 Share Posted March 2, 2008 Nevada pattern sledges, smaller one handed ones used with a steel (drill) for drilling powder holes in mines were called single jacks, larger ones with longer handles were called double jacks, one man held the steel resting on one shoulder with a bit sticking back and the other man struck it with the double jack, they alternated positions. The steel or drill was rotated after each strike a bit. The man with the sledge was the "driver" and the man holding the drill steel was called the "shaker." It wasn't because he was scared of being hit it's because he had to give the steel a good shake to get it to turn. Of course I could well have that one wrong too. I spent 19 years drilling and it's old driller lore, I didn't look it up. Frosty Quote Link to comment Share on other sites More sharing options...
keykeeper Posted April 20, 2008 Share Posted April 20, 2008 Ok, I said I wouldn't post anymore in this thread, but I'm going to anyway. We had a discussion about a cat's head hammer early in the thread. Well, I have found the proper name of this hammer, thanks to a reprint of an old Sear's and Roebuck catalog I was reading recently. According to that catalog, the hammer is a farrier's turning hammer, Chicago pattern. So now we know the real name. I'm still gonna call it a cat's head though, as I have seen so many people refer to them as that! -aaron c. Quote Link to comment Share on other sites More sharing options...
forgeman Posted April 22, 2008 Share Posted April 22, 2008 hello all, the hammer that everyone is calling a cat 's head hammer is a Heller bros 4 way hammer . I have one just like it . nice collection , Forgeman Quote Link to comment Share on other sites More sharing options...
keykeeper Posted April 22, 2008 Share Posted April 22, 2008 Well, I'll let everyone read the catalog selection for themself. Looks like farriers' Turning Hammer, Chicago pattern, to me.:cool: Quote Link to comment Share on other sites More sharing options...
rthibeau Posted April 22, 2008 Share Posted April 22, 2008 where's the link to order from that catalog...I want a bunch at those prices...:) Quote Link to comment Share on other sites More sharing options...
DocsMachine Posted April 22, 2008 Share Posted April 22, 2008 I agree with Dan- the head on the far right is a bodymans' or sheetmetallers' hammer. Probably an older design from back in the days when they hand-formed replacement or even whole panels. The bulbous side would be used to rough form (over a dent in an tree stump) and then the flat side, with the help of a dolly, would smooth the newly formed shape. Panelbeaters do somewhat less hand forming like that, so modern body hammers tend to have two different flats. But in any case, I very much doubt it's a blacksmiths flatter. Doc. Quote Link to comment Share on other sites More sharing options...
keykeeper Posted April 22, 2008 Share Posted April 22, 2008 Richard, I will have to scan some pages from the 1908 catalog also. COMPLETE blacksmithing setups for less than $100. Wish I could go back in time. -aaron c. Quote Link to comment Share on other sites More sharing options...
matt87 Posted April 22, 2008 Share Posted April 22, 2008 Yeah but you'd have to take your money or trade goods with you; adjusting for inflation $100 in 1934 dollars is/was about $1500 in 2008 dollars... and that's just 1934! EDIT: Actually inflation may not have happened 1908-34. When did your Federal Bank abandon the Gold Standard? Quote Link to comment Share on other sites More sharing options...
Ferrous Beuler Posted April 22, 2008 Share Posted April 22, 2008 The combination cross pein/ straight pein to the right which is leaning on the flatter looks to be exactly the same as one I have. I bought it at a flea market last year for $2 from a man who told me it was his personal government issue chipping hammer when he was in the U.S. Navy. The old saying "at loose ends" is a nautical term from the days of tall ships (those which had sails). When a sailor was not otherwise occupied with his regular duties he invariably found himself to be ordered "at loose ends", mending the miles of hemp rope aboard those ships which was a never ending task. The old sailor I bought this hammer from told me much the same was his experience, when not at regular duties a sailor aboard a more modern ship would find himself chipping rust, another such never ending task. From the gobs of dried haze gray paint on the handle I believe his yarn, plus having been a young Marine stationed at Pearl Harbor I saw daily firsthand the swabbies were always chipping and painting their ships. Dan:) Quote Link to comment Share on other sites More sharing options...
markb Posted April 22, 2008 Author Share Posted April 22, 2008 Thanks for the ID on that one Dan, some have said it was a welders chipping hammer but it just didn't seem right. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.